Hybridized and Coupled Nanogenerators. Ya Yang

the multifunctional material; therefore, looking for a high‐performance material is one of the most important challenges for the applications. Ferroelectric materials‐based coupled nanogenerators have demonstrated the ability of scavenging multi‐energies from the environment, indicating that the coupled nanogenerators have better performances than individual energy scavenging devices. However, energy conversion efficiency of these devices still needs to be enhanced. Ways to obtain more electricity from these devices also need to be considered. For the application of multifunctional sensor systems, coupled nanogenerators exhibit more advantages than the conventional methods of integrating the different sensors in a system, such as smaller sizes, higher resolutions, and lower cost. The coupling effect among the different physical signals is very interesting due to the possible new mechanism. However, how to change the current/voltage in one circuit by the coupling needs to be investigated to quantify these signals in the multifunctional sensing process.

      The hybridized nanogenerators have more chances to be used as a practical large‐scale energy scavenging technique as compared with the coupled nanogenerators. However, the coupled nanogenerators have more scientific significance than the hybridized nanogenerators, where the coupling enhancement among the different physical signals is interesting for future research.

1.5 Conclusion and Prospects

      Hybridized nanogenerators integrating two or more different energy harvesting units into an energy scavenging system for simultaneously harvesting multi‐types of energies in our living environment have the potential for effectively enhancing the total output performance. It is one of the most significant multiple energies scavenging technologies. The development of hybridized nanogenerators is based on maximizing the harvested energy from one type of energy by integrating the different energy scavenging units and achieving complementary harvesting of multiple energies. The large‐scale hybridized nanogenerator consisting of solar cells and TENGs will be a very powerful technology such as creating new wind–solar complementary energies scavenging systems.

      The core of the coupled nanogenerators is based on multifunctional materials such as ferroelectric materials. The coupled nanogenerators have the same materials and the same electrodes, which can obtain various advantages of smaller sizes, lower cost, and higher integrations than the conventional integrated different nanogenerators. The coupling enhancement effect among the different physical effects has been found in the coupled nanogenerators. Considering the highlighted advantages and the ongoing related research hotspots, more breakthroughs in hybridized and coupled nanogenerators with respect to the design, performance, and applications for multiple energies scavenging and self‐powered multifunctional sensor networks will be seen in future.

References

      1 1 Wang, Z.L. and Song, J. (2006). Piezoelectric nanogenerators based on zinc oxide nanowire arrays. Science 312: 242.

      2 2 Fan, F., Tian, Z., and Wang, Z.L. (2012). Flexible triboelectric generator! Nano Energy 1: 328.

      3 3 Wang, Z.L. (2017). On Maxwell's displacement current for energy and sensors: the origin of nanogenerators. Mater. Today 20: 74.

      4 4 Wang, Z.L., Jiang, T., and Xu, L. (2017). Toward the blue energy dream by triboelectric nanogenerator networks. Nano Energy 39: 9.

      5 5 Wang, Z.L. (2020). On the first principle theory of nanogenerators from Maxwell's equations. Nano Energy 68: 104272.

      6 6 Dresselhaus, M.S. and Thomas, I.L. (2001). Alternative energy technologies. Nature 414: 332.

      7 7 Xu, C., Wang, X., and Wang, Z.L. (2009). Nanowire structured hybrid cell for concurrently scavenging solar and mechanical energies. J. Am. Chem. Soc. 131: 5866.

      8 8 Wu, Y., Wang, X., Yang, Y., and Wang, Z.L. (2015). Hybrid energy cell for harvesting mechanical energy from one motion using two approaches. Nano Energy 11: 162.

      9 9 Zhang, K., Wang, S., and Yang, Y. (2017). A one‐structure‐based piezo–tribo–pyro–photoelectric effects coupled nanogenerator for simultaneously scavenging mechanical, thermal, and solar energies. Adv. Energy Mater. 7: 1601852.

      10 10 Zhang, K., Wang, X., Yang, Y., and Wang, Z.L. (2015). Hybridized electromagnetic–triboelectric nanogenerator for scavenging biomechanical energy for sustainably powering wearable electronics. ACS Nano 9: 3521.

      11 11 Zhong, X., Yang, Y., Wang, X., and Wang, Z.L. (2015). Rotating‐disk‐based hybridized electromagnetic–triboelectric nanogenerator for scavenging biomechanical energy as a mobile power source. Nano Energy 13: 771.

      12 12 Wang, X., Wang, S., Yang, Y., and Wang, Z.L. (2015). Hybridized electromagnetic–triboelectric nanogenerator for scavenging air‐flow energy to sustainably power temperature sensors. ACS Nano 9: 4553.

      13 13 Quan, T., Wang, X., Wang, Z.L., and Yang, Y. (2015). Hybridized electromagnetic–triboelectric nanogenerator for self‐powered electronic watch. ACS Nano 9: 12301.

      14 14 Zhang, K. and Yang, Y. (2016). Linear‐grating hybridized electromagnetic–triboelectric nanogenerator for sustainably powering portable electronics. Nano Res. 9: 974.

      15 15 Wang, X., Wang, Z.L., and Yang, Y. (2016). Hybridized nanogenerator for simultaneously scavenging mechanical and thermal energies by electromagnetic–triboelectric–thermoelectric effects. Nano Energy 26: 164.

      16 16 Zhang, K., Wang, Z.L., and Yang, Y. (2016). Conductive fabric based stretchable hybridized nanogenerator for scavenging biomechanical energy. ACS Nano 10: 4728.

      17 17 Quan, T. and Yang, Y. (2016). Fully enclosed hybridized electromagnetic–triboelectric nanogenerator for scavenging vibration energy. Nano Res. 9: 2226.

      18 18 Quan, T. and Yang, Y. (2016). A shared‐electrodes‐based hybridized electromagnetic–triboelectric nanogenerator. ACS Appl. Mater. Interfaces 8: 19573.

      19 19 Wang, X. and Yang, Y. (2017). Effective energy storage from a hybridized electromagnetic–triboelectric nanogenerator. Nano Energy 32: 36.

      20 20 Salauddin, M., Toyabur, R.M., Maharjan, P. et al. (2019). Design and experimental analysis of a low‐frequency resonant hybridized nanogenerator with a wide bandwidth and high output power density. Nano Energy 66: 104122.

      21 21 Rahman, M.T., Salauddin, M., Maharjan, P. et al. (2019). Natural wind‐driven ultra‐compact and highly efficient hybridized nanogenerator for self‐sustained wireless environmental monitoring system. Nano Energy 57: 256.

      22 22 Hou, C., Chen, T., Li, Y. et al. (2019). A rotational pendulum based electromagnetic/triboelectric hybrid‐generator for ultra‐low‐frequency vibrations aiming at human motion and blue energy applications. Nano Energy 63: 103871.

      23 23 Sun, C., Shi, Q., Hasan, D. et al. (2019). Self‐powered multifunctional monitoring system using hybrid integrated triboelectric nanogenerators and piezoelectric microsensors. Nano Energy 58: 612.

      24 24 Xu, C. and Wang, Z.L. (2011). Compact hybrid cell based on a convoluted nanowire structure for harvesting solar and mechanical energy. Adv. Mater. 23: 873.

      25 25 Yang, Y., Zhang, H., Liu, Y. et al. (2013). Silicon based hybrid energy cell for self‐powered electrodegradation and personal electronics. ACS Nano 7: 2808.

      26 26 Yang, Y., Zhang, H., Chen, J. et al. (2013). Simultaneously harvesting mechanical and chemical energies by a hybrid cell for self‐powered biosensors and personal electronics. Energy Environ. Sci. 6: 1744.

      27 27 Yang, Y., Zhang, H., Lin, Z.H. et al. (2013). A hybrid energy cell for self‐powered water splitting. Energy Environ. Sci. 6: 2429.

      28 28 Yang, Y., Zhang, H., Lee, S. et al. (2013). Hybrid energy cell for degradation of methyl orange by self‐powered electrocatalytic oxidation. Nano Lett. 13: 803.

      29 29 Yang, Y., Zhang, H., Zhu, G. et al. (2013). Flexible hybrid energy cell for simultaneously harvesting thermal, mechanical, and solar energies. ACS Nano 7: 785.

      30 30 Wang, S., Wang, X., Wang, Z.L., and Yang, Y. (2016). Efficient scavenging of solar and wind energies in a smart city. ACS Nano 10: 5696.

      31 31