FIGURE 1-1: The correct orientation of a chessboard.
Consider a few fun facts while you’re scoping out your chessboard:
❯❯ It’s made up of 64 squares evenly divided between 32 light squares and 32 dark squares.
❯❯ It’s symmetrical and square – in the geometric sense.
❯❯ The square comprises eight ranks and eight files (and a bunch of diagonals), which you’d normally call rows and columns (and diagonals!), but chess people shun such conventional language. (Using clear, easy-to-understand terms would be too easy, right?)
In the following sections, I go into more detail on the ranks, files, diagonals, and squares.
Recognizing the ranks
Ranks are rows that go from side to side across the chessboard and are referred to by numbers. Each chessboard has eight ranks, which are numbered from the bottom of the board (where the white pieces start) on up; see Figure 1-2.
© John Wiley & Sons, Inc.
FIGURE 1-2: The ranks of a chessboard go from side to side.
Figuring out the files
Files are columns that go up and down the chessboard, and each board has eight of them. Because numbers indicate ranks, letters indicate files, which are labeled from left to right. Figure 1-3 shows the files.
© John Wiley & Sons, Inc.
FIGURE 1-3: A chessboard’s files go from top to bottom.
Naming individual squares
The naming convention for ranks and files allows you to give a unique identifier to every square by using what chess people call the file-first method. For example, the lower right-hand square (which is white, of course) is called h1. This name is shorthand for h-file, first rank. Figure 1-4 gives the name for every square.
© John Wiley & Sons, Inc.
FIGURE 1-4: The squares are marked to show the letter of the file and the number of the rank.
Digging those diagonals
As you probably expect, diagonals have names, too. Unlike ranks and files, diagonals are defined by their starting and ending squares. The starting square is conventionally given as the one with the lower rank. For example, Figure 1-5 shows the h1-a8 diagonal. Diagonals are always composed of like-colored squares. You can have light-squared diagonals and dark-squared diagonals – but never two-toned ones.
© John Wiley & Sons, Inc.
FIGURE 1-5: The diagonals on a chessboard always contain like-colored squares.
Piecemeal: Putting the Pieces on the Board
To depict the chessboard in a way that everyone around the world can understand, chess players have developed a set of symbols to represent the chessmen. Each may be represented by a one-letter abbreviation or by an icon. (See Table 1-1 for a list of all the pieces and their symbols.)
TABLE 1-1 Chess Pieces and Their Symbols
I use the piece symbols here to show you how to set up the board, and I use them throughout this book to demonstrate various moves and positions. You may find it helpful to set up your own board piece by piece.
Start with the corners. The rooks go on the corner squares, as shown in Figure 1-6.
© John Wiley & Sons, Inc.
FIGURE 1-6: The rooks take the corner squares.
Next come the knights. Place them next to the rooks (see Figure 1-7).
© John Wiley & Sons, Inc.
FIGURE 1-7: The knights stand by their rooks, along the same rank.
Then put the bishops on the board next to the knights (see Figure 1-8).
© John Wiley & Sons, Inc.
FIGURE 1-8: The bishops stand guard by the knights.
After the bishops come the queens. Your board should now look like the one in Figure 1-9.
© John Wiley & Sons, Inc.
FIGURE 1-9: The queens perch on the squares of their own shade.
Next, place the kings next to the queens, which is only fitting (see Figure 1-10).
© John Wiley & Sons, Inc.
FIGURE 1-10: The kings take their thrones, next to their ladies.
Finally, add the pawns straight across the rank in front of the other pieces, as shown in Figure 1-11.