But, as the others were doing it, I, too, had to do it. In 1903, with Tom Cooper, I built two cars solely for speed. They were quite alike. One we named the "999" and the other the "Arrow." If an automobile were going to be known for speed, then I was going to make an automobile that would be known wherever speed was known. These were. I put in four great big cylinders giving 80
H.P.--which up to that time had been unheard of. The roar of those cylinders alone was enough to half kill a man. There was only one seat. One life to a car was enough. I tried out the cars. Cooper tried out the cars. We let them out at full speed. I cannot quite describe the sensation. Going over Niagara Falls would have been but a pastime after a ride in one of them. I did not want to take the responsibility of racing the "999" which we put up first, neither did Cooper. Cooper said he knew a man who lived on speed, that nothing could go too fast for him. He wired to Salt Lake City and on came a professional bicycle rider named Barney Oldfield. He had never driven a motor car, but he liked the idea of trying it. He said he would try anything once.
It took us only a week to teach him how to drive. The man did not know what fear was. All that he had to learn was how to control the monster. Controlling the fastest car of to-day was nothing as compared to controlling that car. The steering wheel had not yet been thought of. All the previous cars that I had built simply had tillers. On this one I put a two-handed tiller, for holding the car in line required all the strength of a strong man. The race for which we were working was at three miles on the Grosse Point track. We kept our cars as a dark horse. We left the predictions to the others. The tracks then were not scientifically banked. It was not known how much speed a motor car could develop. No one knew better than Oldfield what the turns meant and as he took his seat, while
I was cranking the car for the start, he remarked cheerily: "Well, this chariot may kill me, but they will say afterward that I was going like hell when she took me over the bank."
And he did go.... He never dared to look around. He did not shut off on the curves. He simply let that car go--and go it did. He was about half a mile ahead of the next man at the end of the race!
The "999" did what it was intended to do: It advertised the fact that I could build a fast motorcar. A week after the race I formed the Ford Motor Company. I was vice-president, designer, master mechanic, superintendent, and general manager. The capitalization of the company was one hundred thousand dollars, and of this I owned 25 1/2 per cent. The total amount subscribed in cash was about twenty-eight thousand dollars--which is the only money that the company has ever received for the capital fund from other than operations. In the beginning I thought that it was possible, notwithstanding my former experience, to go forward with a company in which I owned less than the controlling share. I very shortly found I had to have control and therefore in 1906, with funds that I had earned in the company, I bought enough stock to bring my holdings up to 51 per cent, and a little later bought enough more
to give me 58-1/2 per cent. The new equipment and the whole progress of the company have always been financed out of earnings. In 1919 my son Edsel purchased the remaining 41-1/2 per cent of the stock because certain of the minority stockholders disagreed with my policies. For these shares he paid at the rate of $12,500 for each $100 par and in all paid about seventy-five millions.
The original company and its equipment, as may be gathered, were not elaborate. We rented Strelow's carpenter shop on Mack Avenue. In making my designs I had also worked out the methods of making, but, since at that time we could not afford to buy machinery, the entire car was made according to my designs, but by various manufacturers, and about all we did, even in the way of assembling, was to put on the wheels, the tires, and the body. That would really be the most economical method of manufacturing if only one could be certain that all of the various parts would be made on the manufacturing plan that I have above outlined. The most economical manufacturing of the future will be that in which the whole of an article is not made under one roof--unless, of
course, it be a very simple article. The modern--or better, the future--method is to have each part made where it may best be made and then assemble the parts into a complete unit at the points of consumption. That is the method we are now following and expect to extend. It would make no difference whether one company or one individual owned all the factories fabricating the component parts of a single product, or whether such part were made in our independently owned factory, if only all adopted the same service
16
methods. If we can buy as good a part as we can make ourselves and the supply is ample and the price right, we do not attempt to make it ourselves--or, at any rate, to make more than an emergency supply. In fact, it might be better to have the ownership widely scattered.
I had been experimenting principally upon the cutting down of weight. Excess weight kills any self-propelled vehicle. There are a lot of fool ideas about weight. It is queer, when you come to think of it, how some fool terms get into current use. There is the phrase "heavyweight" as applied to a man's mental apparatus! What does it mean? No one wants to be fat and heavy of body--then why
of head? For some clumsy reason we have come to confuse strength with weight. The crude methods of early building undoubtedly had much to do with this. The old ox-cart weighed a ton--and it had so much weight that it was weak! To carry a few tons of humanity from New York to Chicago, the railroad builds a train that weighs many hundred tons, and the result is an absolute loss of real strength and the extravagant waste of untold millions in the form of power. The law of diminishing returns begins to operate
at the point where strength becomes weight. Weight may be desirable in a steam roller but nowhere else. Strength has nothing to do with weight. The mentality of the man who does things in the world is agile, light, and strong. The most beautiful things in the world are those from which all excess weight has been eliminated. Strength is never just weight--either in men or things. Whenever any one suggests to me that I might increase weight or add a part, I look into decreasing weight and eliminating a part! The car that
I designed was lighter than any car that had yet been made. It would have been lighter if I had known how to make it so--later I got the materials to make the lighter car.
In our first year we built "Model A," selling the runabout for eight hundred and fifty dollars and the tonneau for one hundred dollars more. This model had a two-cylinder opposed motor developing eight horsepower. It had a chain drive, a seventy-two inch wheel base--which was supposed to be long--and a fuel capacity of five gallons. We made and sold 1,708 cars in the first year. That is how well the public responded.
Every one of these "Model A's" has a history. Take No. 420. Colonel D. C. Collier of California bought it in 1904. He used it for a couple of years, sold it, and bought a new Ford. No. 420 changed hands frequently until 1907 when it was bought by one Edmund Jacobs living near Ramona in the heart of the mountains. He drove it for several years in the roughest kind of work. Then he bought a new Ford and sold his old one. By 1915 No. 420 had passed into the hands of a man named Cantello who took out the motor, hitched it to a water pump, rigged up shafts on the chassis and now, while the motor chugs away at the pumping of water, the chassis drawn by a burro acts as a buggy. The moral, of course, is that you can dissect a Ford but you cannot kill it.
In our first advertisement we said:
Our purpose is to construct and market an automobile specially designed for everyday wear and tear--business, professional, and family use; an automobile which will attain to a sufficient speed to satisfy the average person without acquiring any of those break-neck velocities which are so universally condemned; a machine which will be admired by man, woman, and child alike for its compactness, its simplicity, its safety, its all-around convenience, and--last but not least--its exceedingly reasonable price, which places it within the reach of many thousands who could not think of paying the comparatively fabulous prices asked for most machines.
And these are the points we emphasized: Good material.
Simplicity--most of the cars at that time required considerable skill in their management. The engine.
The ignition--which was furnished by two sets of six dry cell batteries. The automatic oiling.
The simplicity and the ease of control of the transmission,