Keep everything you need in a small box, such as a pretty vintage tin, then all you have to do is open the tin and start sewing where you left off. I use Sharps needles for hand piecing. Buy a pack of needles that contains different sizes and try different ones to see which one suits you.
The most important thing about hand piecing is to make sure that the beginning and end of your seam are really secure. If you are making something to be quilted after it is hand pieced, this will add to the strength of the item.
The two methods of piecing that I use are English paper piecing and American block patchwork piecing.
English paper piecing
This technique tacks (bastes) fabric to paper shapes, which are then oversewn. It is good for making patchwork with different regular shapes, such as hexagons and diamonds, hence it is also sometimes known as mosaic patchwork.
1 Make a template out of card or template plastic. Draw round the template on to paper – scrap paper is fine – and cut out the shape from the paper.
2 Pin the paper piece to the back of the fabric. Using scissors, cut around the shape, leaving a generous 1⁄4in (0.6cm) seam allowance all around.
3 Thread a needle and tie a knot in the end. Fold the seam allowance over the piece of paper and tack (baste) in place using a large running stitch.
4 Place two patches on top of each other, right sides together. To oversew the patches together, thread a needle and start 1⁄4in (0.6cm) in from the edge of the piece where you want to start, and take a few tiny stitches back to the edge, which serves as a backstitch to secure the thread. Then work your way along the seam and sew a few reverse stitches at the end of the fabric to secure. Keep sewing the patches together in this manner. If you are making a large quilt, work in small units then join them together later.
5 When you have finished making the patchwork, take out the tacking (basting) stitches and the paper backing. Keep the paper backings as they can be used for another project.
American block patchwork piecing
In this method you draw a line on the back of the fabric, which is then used as a guideline to sew along using a small running stitch.
1 To make your template, draw your shape on to card or template plastic.
2 Place your fabric on a table, right side down. Place the template on top and draw around it using a pencil. The template does not include a seam allowance, so draw another line 1⁄4in (0.6cm) away from the first line. You can buy rulers made to this width for this purpose.
3 Take two pieces, and place them right sides together. Insert a pin at each end of the row, making sure it goes through the drawn line on both pieces of fabric. If it is a long seam, insert as many pins along the row as needed to ensure the pencil lines on the top and bottom fabric line up.
4 Thread a needle with approximately 18in (45.7cm) of thread (no more than this or it will tangle up as you sew). Knot the end, then sew a small running stitch along the line. If you are sewing a long seam, do a backstitch along it approximately every 5in (12.7cm) to make the line of stitching stonger. If you are joining two rows together that already have seams where pieces of fabric have been sewn together, stitch along the row then, when you get to a seam, take a backstitch. Then place the needle through the seam and, instead of sewing it down, take a backstitch, and carry on sewing.
5 When you get to the end, finish with a small backstitch. Press the seam together as this helps to make it stronger.
Machine piecing
Speed is the main reason for the popularity of machine piecing. If you don’t have anywhere to keep a sewing machine out, it can feel a hassle setting up (as opposed to hand piecing where you just open a box). On the plus side, you can whizz though lots of sewing in an afternoon when using a machine. If you cut fabric carefully with a rotary cutter, and sew the pieces together with an accurate seam allowance, you will get a piece of patchwork that fits together perfectly.
Any sewing machine that can sew a straight stitch can be used for machine piecing. I set the stitch length to 2.2, and use a 70⁄12 or 80⁄12 jeans needle. Change the needle for each new project.
With machine piecing, the first thing you need to do is work out where your 1⁄4in (0.6cm) seam allowance is. If you get this seam allowance accurate, it helps your sewing match up. Most sewing machines have a foot you can buy that has a 1⁄4in (0.6cm) guide on it, so you just need to line the fabric up with the edge of the foot when sewing.
Alternatively, if you do not have one of these, you can line up a piece of scrap fabric with the edge of the foot, sew a short line of stitches, then take the fabric out and measure the distance between the edge of the fabric and the sewn line. If it is not 1⁄4in (0.6cm), move the position of your needle by changing the width setting on your sewing machine. Unless the pattern says, there is no need to do a reverse stitch at the beginning or end of a seam. Test again, and then keep doing this until you have it right. Another idea is to use a strip of low-tack masking tape on the sewing machine. Write the correct settings in a notebook so you can get your machine set up quickly each time you want to sew.
Chain piecing
Chain piecing is where pieces of fabric are sewn together, without cutting the threads at the end of each separate piece of fabric. It is quick, and can save on thread too.
1 Line up two pieces of fabric, right sides together.
2 Place them under the presser foot, just before the needle.
3 Hold the threads to the back and sew along the seam, making sure you guide the fabric rather than pull it through the machine. There is no need to make a reverse stitch at the beginning or end of chain piecing.