Scale using Gizmo
Exercises
20A - Create a Cube
20B - Presspull or grips
20C - Add Cylinder and subtract
20D - Move the hole
20E - Scale hole
20F - Delete
20G - Rotate
Lesson 21
Revolve
Slice
Section Plane
Sweep
Helix
Exercises
21A - Slice
21B - Revolve
21C - Create 2D and 3D Section
21D - Sweep
21E - Helix
21F - Solid Helix
Lesson 22
Plotting Multiple views
Creating Projected Views
Creating Section Views
Shell
Exercises
22A - Plot multiple views
22B - Create Projected Views
22C - Shell
Projects
Architectural
Electro-Mechanical
Mechanical
Appendix
A Add a Printer / Plotter
B Autodesk 360 Connectivity
C Command Line Enhancements
Index
This workbook is designed to follow the Beginning AutoCAD 2014, Exercise Workbook. It is excellent for classroom instruction or self-study. There are 22 lessons and 3 on-the-job type projects in Architectural, Electro-Mechanical and Mechanical.
Lessons 1 thru 14 continue your education in basic 2D commands.
Lessons 15 thru 22 introduce you to many basic 3D commands.
Each lesson starts with step-by-step instructions followed by exercises designed for practicing the commands you learned within that lesson. The on-the-job projects are designed to give you more practice in your desired field of drafting.
The files 2014-Workbook Helper and 2014-3D Demo should be downloaded from our website:
http://new.industrialpress.com/ext/downloads/acad/2014-3d-demo.zip
Enter the address into your web browser and the download will start automatically.
AutoCAD 2014 vs. AutoCAD LT 2014
The LT version of AutoCAD has approximately 80 percent of the capabilities of the full version. It was originally created to be installed on the small hard drives that Laptops used to have. Hence, the name LT. (LT does not mean “Lite”) In order to reduce the size of the program AutoCAD removed some of the high-end capabilities, such as Solid Modeling. As a result, some of the commands may not be available to LT users. Consider this an opportunity to see the commands that you are missing and you can determine if you feel it necessary to upgrade.
Cheryl R. Shrock is a retired Professor and was Chairperson of Computer Aided Design at Orange Coast College in Costa Mesa, California. She is also an Autodesk® registered author. Cheryl began teaching CAD in 1990. Previous to teaching, she owned and operated a commercial product and machine design business where designs were created and documented using CAD. This workbook is a combination of her teaching skills and her industry experience.
Steve Heather is a former Lecturer of Mechanical Engineering and Computer Aided Design in England, UK. For the past 5 years he has been a Beta Tester for Autodesk®, testing the latest AutoCAD® software. Previous to teaching and for more than 30 years, he worked as a Precision Engineer in the Aerospace and Defense industries.
Steve can be contacted for questions or comments at: [email protected]
Note: If you have already configured your system for the 2014 “Beginning” Workbook you may skip to Lesson 1.
AutoCAD ® allows you to customize it's configuration. While you are using this workbook it is necessary for you to make some simple changes to your configuration so our configurations are the same. This will ensure that the commands and exercises work as expected. The following instructions will guide you through those changes.
1.Start AutoCAD®
2.Type: options then press the <enter> key. (not case sensitive)
The text that you type will appear in the Dynamic Input box, as shown below
NOTE:
AUTOCAD LT USERS:
You may find that some of the settings appear slightly different.
But they are mostly the same.
Configuration Settings
3.Select the Display tab and change the settings on your screen to match the dialog box below.
4.Select the Open and Save tab and change the settings on your screen to match the dialog box below.
5.Select the Plot and Publish tab and change the settings on your screen to match the dialog box below.
6.Select the System tab and change the settings on your screen to match the dialog box below.
7.Select the User Preferences tab