SUMMARY
The technology of continuous emissions monitoring has not been static. The use of CEM systems for allowance trading programs and emissions enforcement programs, the demands for increased system availability, and advances in data handling and reporting have led to more sophisticated systems with better reliability. CEM systems have advanced considerably over 50 years of development, with improved sampling techniques, analyzers, and data processing systems being integrated into today’s systems to meet the challenges posed by new requirements. Also, by implementing CEM system quality assurance programs and by properly managing the monitoring programs, high system availability can be achieved. This high availability is a necessity today, where inaccurate data or missing data can incur both regulatory and economic penalties.
BIBLIOGRAPHY
1 Air Pollution Control Association (1981). Proceedings – Continuous Emission Monitoring: Design, Operation and Experience. SP‐43. Pittsburgh: AWMA.
2 Air Pollution Control Association (1986). Transactions – Continuous Emission Monitoring – Advances and Issues. TR‐7. Pittsburgh: APCA.
3 Air Pollution Control Association (1990). Proceedings – Continuous Emission Monitoring – Present and Future Applications. SP‐71. Pittsburgh: AWMA.
4 Air Pollution Control Association (1993). Continuous Emission Monitoring – A Technology for the 90s. SP‐85. Pittsburgh: AWMA.
5 Air Pollution Control Association (1995). Acid Rain & Electric Utilities – Permits, Allowances, Monitoring & Meteorology. VIP‐46. Pittsburgh: AWMA.
6 Air Pollution Control Association (1996). Continuous Compliance Monitoring Under the Clean Air Act Amendments. VIP‐58. Pittsburgh: AWMA.
7 Air Pollution Control Association (1997). Acid Rain & Electric Utilities II. Pittsburgh: AWMA.
8 Baumbach, G. (1996). Air Quality Control: Formation and Sprces, Dispersion Characteristics and Impact of Air Pollutants ‐ Measuring Methods. Techniques for Reduction of Emissions and Regulations for Air Quality Control. Springer. Berlin.
9 Baukal, C.F. (2011). Industrial Combustion Testing. Boca Raton: CFC Press.
10 Central Pollution Control Board (CPCP) (2018). Guidelines for Continuous Emission Monitoring Systems. Revision‐01. Delhi, India. Central Pollution Control Board. http://www.indiaenvironmentportal.org.in (accessed 3 June 2021).
11 Cohn, P.E. (2006). Analisadores Industriais. Rio de Janeiro: Instituto Brasileiro de Petróleo e Gás. Editora Interciência Ltda.
12 Curtis, D., Averdieck, W., Kanchan, S.K., and Parre, A.A. (2018). CEMS: Continuous Emission Monitoring System: A Technical Guidance Manual. New Delhi: Centre for Science and Environment.
13 Down, R.D. and Lehr, J.H. (ed.) (2004). Environmental Instrumentation and Analysis Handbook. Wiley.
14 Electric Power Research Institute (1993). Continuous Emissions Monitoring Guidelines: 1993 Update. Report No. EPRI TR‐102386 V1 & V2. Palo Alto, CA: EPRI.
15 Environment Canada (2005). Protocols and Performance Specifications for Continuous Monitoring of Gaseous Emissions from Thermal Power Generation. EPS 1/PG/7. Ottawa: Environment Canada.
16 European Commission (2017). Guidance Document. The Monitoring and Reporting Regulation – Continuous Emissions Monitoring Systems (CEMS). European Commission Directorate General Climate Action. https://ec.europa.eu/clima/sites/clima/files/ets/monitoring/docs/gd7_cems_en.pdf (accessed 3 June 2021)
17 Federal Ministry of the Environment, Nature Conservation and Nuclear Safety (2008). Air Pollution Prevention Manual on Emission Monitoring. Research Report 360 16 004 UBA – FB 001090. Dessau‐Rosslau, Germany. Federal Environment Agency.
18 Indiana Department of Environmental Management (IDEM) (2017). Compliance Branch Guidance Manuals. CEMS/COMS, Forms and Information and Guidance. Indiana Department of Environmental Management Office of Air Quality – Compliance. www.in.gov/idem/airquality (accessed 3 June 2021).
19 International Energy Agency (IEA) (1997). International Workshop on Continuous Emissions Monitoring. London: IEA Coal Research.
20 International Energy Agency (IEA) (1998). CEM98 – International Conference on Emissions Monitoring. EPA 450/2‐84‐004. London: IEA Coal Research.
21 Jahnke, J.A. (1984). Transmissometer Systems – Operation and Maintenance, an Advanced Course. EPA 450/2‐84‐004. Environmental Protection Agency‐Air Pollution Training Institute. Research Triangle Park
22 Jahnke, J.A. (1991). APTI Course 474 – Continuous Emissions Monitoring Systems. EPA 450/2‐91006A. Environmental Protection Agency‐Air Pollution Training Institute. Research Triangle Park.
23 Jahnke, J.A. (1993). Continuous Emission Monitoring, 1ee. New York: Van Nostrand Reinhold.
24 Jahnke, J.A. (1994). An Operator's Guide to Eliminating Bias in CEM Systems. EPA 430‐R‐94‐016. Environmental Protection Agency‐Acid Rain Division.
25 Jahnke, J.A. (2000). Continuous Emission Monitoring, 2ee. New York: Wiley.
26 Jahnke, J.A. and Aldina, G.J. (1979). Continuous Air Pollution Source Monitoring Systems Handbook. EPA 625/6‐79‐005. Cincinnati, OH: Environmental Protection Agency‐Center for Environmental Research Information.
27 Jahnke, J.A., Peeler, J.W., Juneau, P.J., and Kinner, L.L. (1997). Handbook – Continuous Emission Monitoring Systems for Non‐criteria Pollutants. EPA/625/R‐97/001.
28 Jiang, Y., Yong, L., and Hongjie, L. (ed.) (2000). Stationary Source Emissions and Continuous Automatic Monitoring, Chinesee. China Standard Press.
29 Lillis, J.E. and Schueneman, J.J. (1975). Continuous emission monitoring: objectives and requirements. Journal of the Air Pollution Control Association 25 (8): 804–809.
30 Lipták, B.G. and Venczel, K. (2016a). Instrument and Automation Engineer’s Handbook – Fifth Edition Volume I Measurement and Safety. Boca Raton: CRC Press.
31 Lipták, B.G. and Venczel, K. (2016b). Instrument and Automation Engineer’s Handbook – Fifth Edition Volume II Analysis and Analyzers. Boca Raton: CRC Press.
32 New Jersey Department of Environmental Protection (2010). Guidelines for Continuous Emissions Monitoring System (CEMS), Continuous Opacity Monitoring Systems (), Periodic Monitoring Procedures (PMPS), and Annual Combustion Adjustments (ACAs). Technical Manual #1005. New Jersey Department of Environmental Protection – Air Quality Permitting Program Bureau of Technical Services. www.state.nj.us/dep/aqpp/techman.html (accessed 3 June 2021).
33 Pennsylvania Department of Environmental Protection (PADEP) (2006). Continuous Source Monitoring Manual – Revision 8. 274‐030‐001. Pennsylvania Department of Environmental Protection. www.dep.pa.gov (accessed 3 June 2021)
34 Rausch, A., Werhahn, O., Witzel, O., Ebert, V., Vuelban, J., Gersl, J., Kvernmo, G., Korsman, J., Coleman, M., Gardiner, T., and Robinson, R. (2015) Metrology to Underpin future Regulation of Industrial Emissions. 17th International congress of Metrology, 07008. 07008. www.cfmetrologie.edpsciences.org. (accessed 24 January 2022)
35 Schakenbach, J., Vollaro, R., and Forte, R. (2006). Fundamentals of successful monitoring, reporting and verification under a cap‐and‐trade program. Journal of the Air & Waste Management Association 56: 1576–1583.
36 Skoog, D.A., West, D.M. Holler, F.J., and Crouch, S.R. (2017). Principles of Instrumental