1.3.2.8 High‐Voltage Circuit Breakers
IEEE Std. C37.04: IEEE Standard Rating Structure for AC High‐Voltage Circuit Breakers Rated on Symmetrical Current Basis
IEEE Std. C37.06: High‐Voltage Circuit Breakers Rated on a Symmetrical Current Basis: Preferred Ratings and Related Required Capabilities
IEEE Std. C37.09: IEEE Standard Test Procedure for AC High‐Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEC 62271‐100:2008 + AMD1 and 2:2017: High‐Voltage Switchgear and Controlgear – Part 100: High‐Voltage Alternating‐Current Circuit‐Breakers
IEC 62271‐101+AMD1:2017: High‐Voltage Switchgear and Controlgear – Part 101: Synthetic Testing
1.3.2.9 Disconnect and Grounding (Earthing) Switches
IEEE GIS switches are included in IEEE Std. C37.122 (previous IEEE GIS switch standard C37.38 has been withdrawn)
IEC 62271‐102:2018: High‐Voltage Switchgear and Controlgear – Part 102: Alternating Current Disconnectors and Earthing Switches
1.3.2.10 Safety and Grounding
ANSI/IEEE C2: National Electrical Safety Code
IEEE Std. 80: IEEE Guide for Safety in AC Substation Grounding
IEEE Std. 367: IEEE Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault (ANSI)IEC 61936‐1 (2021): Power installations exceeding 1 kV AC and 1,5 kV DC ‐ Part 1: AC
1.3.2.11 Application Guides for Circuit Breakers
IEEE Std. C37.010: IEEE Application Guide for AC High‐Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEEE Std. C37.011: IEEE Application Guide for Transient Recovery Voltage for AC High‐Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEEE Std. C37.012: Application Guide for Capacitance Current Switching for AC High‐Voltage Circuit Breakers Rated on a Symmetrical Current Basis
IEEE Std. C37.015: IEEE Application Guide for Shunt Reactor Current Switching
CIGRE 304: Guide for the Application of IEC 62271‐100 and IEC 62271‐1. Part 1: General Subjects
CIGRE 305: Guide for the Application of IEC 62271‐100 and IEC 62271‐1. Part 2: Making and Breaking Tests
1.3.2.12 Application Guides for GIS
CIGRE 125: User Guide for the Application of Gas‐Insulated Switchgear (GIS) for Rated Voltages of 72.5 kV and Above
IEEE Std. 1300: IEEE Guide for Cable Connections for Gas‐Insulated Equipment
1.3.2.13 Application Guides for SF6
CIGRE 234: SF6 Recycling Guide
CIGRE 276: Guide for the Preparation of Customized Practical SF6 Handling Instructions
IEEE C37.122.3‐2011: IEEE Guide for Sulphur Hexafluoride (SF6) Gas Handling for High‐Voltage (over 1000 Vac) Equipment
IEEE C37.122.5 Guide for moisture measurement and control in SF6 Gas‐insulated equipment
IEEE Std. 1416: IEEE Recommended Practice for the Interface of New Gas‐Insulated Equipment in Existing Gas‐Insulated Substations
1.3.2.14 Reliability Evaluations
CIGRE 83: Final Report of the Second International Inquiry on High‐Voltage Circuit‐Breaker Failures and Defects in Service
CIGRE 150: Report on the Second International Survey of High‐Voltage Gas‐Insulated Substations (GIS) Service
CIGRE 319: Circuit‐Breaker Controls, Failure Survey on Circuit Breaker Control Systems
1.3.2.15 Cable and Transformer Interfaces
IEEE C37.122.6‐2013: IEEE Recommended Practice for the Interface of New Gas‐Insulated Equipment in Existing Gas‐Insulated Substations Rated above 52 kV
ANSI/NEMA CC 1: Electric Power Connection for Substations
IEEE Std. 48: IEEE Standard Test Procedures and Requirements for Alternating‐Current Cable Terminations 2.5 kV through 765 kV
ANSI Std. C63.2: American National Standard Specifications for Electromagnetic Noise and Field‐Strength Instrumentation, 10 kHz to 40 GHz.
IEC 62271‐211:2014, Edition 1.0 (2014‐04‐24), High‐voltage switchgear and controlgear – Part 211: Direct connection between power transformers and gas‐insulated metal‐enclosed switchgear for rated voltages above 52 kV
IEC 62271‐209:2019, Edition 2.0 (2019‐02‐08) & Amendment 1, High‐voltage switchgear and controlgear – Part 209: Cable connections for gas‐insulated metal‐enclosed switchgear for rated voltages above 52 kV – Fluid‐filled and extruded insulation cables – Fluid‐filled and dry‐type cable‐terminations
1.3.2.16 Seismic Design
IEEE Std. 693: IEEE Recommended Practices for Seismic Design of Substations
IEC 60068‐3‐3: Environmental Testing – Part 3: Guidance. Seismic Test Methods for Equipment
IEC 62271‐207: High‐voltage switchgear and controlgear – Part 207: Seismic qualification for gas‐insulated switchgear assemblies for rated voltages above 52 kV
1.3.2.17 Control Cabinets
IEC 62262: Degrees of Protection Provided by Enclosures for Electrical Equipment Against External Mechanical Impacts (IK code)
ANSI/IEC 60529: Degrees of Protection Provided by Enclosures (IP code)
NEMA 250: Enclosures for Electrical Equipment
IEEE Std. C37.21: IEEE Standard for Control Switchboards
IEEE Std. C57.13: IEEE Standard Requirements for Instrument Transformers
IEEE Std. C37.24: IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal‐Enclosed Switchgear
IEEE C37.301: Standard for High‐Voltage (above 1000 V) Test Techniques – Partial Discharge Measurements
IEEE Std. C62.11: IEEE Standard for Metal‐Oxide Surge Arresters for AC Power Circuits (>1 kV)
IEEE Std. 4: IEEE Standard Techniques for High‐Voltage Testing
IEEE Std. 315: IEEE Standard, American National Standard, and Canadian Standard Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Letters)
For Canada CAN/CSA C61869 series standards for instrument transformers apply. ASTM publications are available from the Customer Service Department, American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103, USA, CSA Webstore: https://www.csagroup.org/ or ANSI Webstore: https://webstore.ansi.org/.
CENELEC publications are available from the Sales Department, American National Standards Institute, 11 West 42nd Street, 13th Floor, New York, NY 10036, USA, European Standards Store: https://www.en‐standard.eu/ or