Inspecting everything in your rental property while it’s vacant is important. Completing this inspection properly doesn’t mean that you need to be a certified repair technician or a licensed professional contractor who’s fluent in all building systems; you just need to ensure that the interior unit systems are operational for the standard day-to-day use you expect from your new tenants. If you aren’t certain what to look for or if anything seems awry, be sure to contact a repair professional who’s qualified for the building system that needs inspecting, and have them provide documentation showing their completed work.
Inspecting safety items
Although tenants need to take an active role in and have ultimate responsibility for their own safety, you need to check all safety items upon unit turnover. The most basic safety items in virtually every residential rental unit are door locks, window locks, and smoke detectors. Be sure that the following items are in place and working before the new tenant takes occupancy:
A small fire extinguisher: Even if one isn’t required by code, I recommend that each rental unit have a fire extinguisher. Although the tenant may not use the fire extinguisher properly, most life-saving professionals advise that one is worth having, because using a fire extinguisher quickly can keep a fire from spreading. The tenant should ensure that someone has contacted 911 or the appropriate agency before attempting to put out the fire, of course.
Adequate locking mechanisms: Many local and state building codes have specific requirements concerning the types and specifications of door lock sets. Recent trends in legislation require all windows that open and are accessible from the ground to have proper window locks. Windows and screens should be in place and in good condition. The primary purpose of screens is to keep the elements and insects out, but screens can also have some value as a crime deterrent.
Smoke and carbon-monoxide detectors: These items are inexpensive and extremely important to your tenants’ safety. Check with your local fire department for its code requirements; some departments expect detectors to be electrically hard-wired, and others still allow battery-operated units. Smoke detectors with removable batteries are no longer available. All new units have sealed batteries that can’t be replaced, and they have expiration dates, which mean that the units need to be replaced on or before those dates.Contact your local fire safety or building officials for the latest info on fire and safety codes. Many of the rules have changed in recent years, particularly regarding the number and locations of required smoke detectors. Consider complying with any recommendations, even if the action isn’t required in existing rental units. Carbon-monoxide detectors are just becoming required in many areas, for example.Make sure that your records clearly indicate that you tested all the detectors and found them to be operating properly before your new tenant moves in. Afterward, the tenant must not disconnect or disable the detectors in any way. The tenant is also responsible for replacing the batteries (if the smoke detectors are the older variety, with removable batteries), regularly testing the detectors, and alerting you in writing if they don’t operate properly.
Other important items: Your preparation work should also include testing the GFCI or GFI in kitchens and baths, plus any other safety items, such as radon detectors.If the municipality in which your rental property is located requires that tenants always have access to the roof, check with local agencies about possibly restricting that access for tenant safety. You may be able to install panic hardware that meets the code requirements of access but sounds an alarm if the door to the roof is opened.
Although doing so is not required, if you’re ever sued, having written confirmation that all safety items were operating as intended at move-in can be helpful.
Be sure that the house number or address is clearly marked on the exterior of your rental unit with at least 6-inch-tall characters so that locating the property from the street or primary point of public access is easy. This simple measure can be a huge help to life-saving personnel during an emergency.
Performing turnover maintenance
Most of the items requiring maintenance in your vacant unit are minor, such as sticky closet doors, loose doorknobs and towel bars, and burned-out light bulbs. But be sure that you carefully and regularly evaluate the current condition of all systems and equipment, including plumbing; electrical; appliances; and heating, ventilating, and air conditioning (HVAC). Keep the following pointers in mind:
Carefully inspect all plumbing fixtures. Look for leaky faucets, clogged aerators, or running toilets, and check whether all drains work adequately. Test the angle stops and shutoff valves for all toilets, washers, dishwashers, and faucets, including under each sink, and look for signs of leakage. Even small leaks can be major problems if they’re not detected and repaired quickly. Though leaks in drains are difficult to detect because they’re not pressurized, look for telltale signs of water on the ceilings of downstairs units from drain leaks in upstairs units.
Inspect and test the electrical components. Make sure that the circuit breakers or fuses are all in place and operating properly. Replace burned-out light bulbs, and check light switches and outlets. If possible, verify that the cable or satellite television and telephone lines are working too.
Inspect each appliance to make sure that it’s operating properly. Stoves and ovens contain modular parts; you can replace the burner drip pans and control knobs very easily because replacement parts are readily available for most major appliances. Run the dishwasher through a cycle, and look carefully for any signs of leaks around the pressurized supply line, the door gasket, or underneath near the pump housing (where any leaks indicate you have a cracked tub and need to immediately replace the dishwasher).
Conserve energy by turning off the water heater, furnace, and air conditioning units at the breaker and setting the refrigerator/freezer to low. Your turnover work should also include cleaning or replacing all filters — air (furnace and A/C) and water (refrigerator and some water heaters). This simple, low-cost item greatly improves energy efficiency and lowers the wear on the equipment. Keep records indicating the date when the filters were changed (you can write in permanent marker right on the filter), and be sure to remind your tenants when they should be changed again.Tenants are becoming increasingly aware of the importance of conservation and energy efficiency. If you install water-saving fixtures, pilotless ignition gas stoves and water heaters or tankless water heaters, weatherproofing, insulated windows and doors, and energy-efficient appliances, you’ll have a competitive advantage in the rental marketplace. Be sure to emphasize your green efforts in promoting your rental property.
Check the pool/spa/water features. If your property has a pool, spa, or any water features, have a professional evaluate its condition and provide a written report documenting their findings, including the state of the equipment and the water quality. Poor water quality can create serious health issues, so always test all water systems to minimize the risk to people and animals. This evaluation establishes a baseline that can head off any tenant complaints down the road.
Perform maintenance that will minimize the likelihood of pests. Caulk all cracks around the windows, foundations, drains, pipes, and any other items that penetrate the building envelope and may allow pests to enter the unit. Almost every rental property needs pest control at some point. Occasional sightings of cockroaches or ants in search of water or food are commonplace, and consumer products are available to handle these limited situations. But use professional exterminators to treat more significant problems, and talk to your exterminator about establishing a regular schedule for follow-ups to make sure that your unit stays reasonably pest-free.The increase in bedbug infestations over the past 20 years can be a real problem for landlords, so you should seriously consider ordering a preoccupancy inspection or