In 1894 Heinrich Hertz died at the tragically young age of thirty-six. During an operation for cancer of the jaw he suffered blood poisoning, which killed him. The scientific magazines were filled with obituaries which gave accounts of the trail-blazing experiments he had conducted. When the young Marconi read these he at once conceived the idea of using the apparatus which Hertz had made to send telegraph messages. He did not know it at the time, but precisely the same idea had struck a number of scientists and inventors in England, America and Russia.
A neighbour of the Marconi family at Villa Griffone was the Italian Professor of Physics Augusto Righi, who had done his own work on Hertzian waves. Guglielmo was thus able to discuss his idea with a leading scientist. He received little or no encouragement, but quite probably he managed to get an idea of how to construct the kind of transmitter and receiver Hertz had used in his laboratory, and with the help of his mother he cleared out an area on the upper floor of the Villa Griffone which had been used by his grandfather for keeping silkworms. This home-made laboratory has been lovingly restored by the staff of the modern museum. The beautifully recreated models of his early equipment are testimony to Marconi’s skill, and his dedication to an ambition on which he spent nearly all his waking hours.
By the time Marconi was a teenager there was a widespread interest in electricity, which was reflected in the publication of a range of journals from which the enthusiastic amateur could learn about the very latest theories and discoveries made in Europe and America. The majority of these were in English, and Marconi’s easy command of the language ensured that there were few developments of which he was unaware.
Day after day through the hot summer months of 1895, Guglielmo Marconi climbed the stairs to his makeshift workshop in the attic of the Villa Griffone. He said very little to his family about what he was trying to achieve behind its closed door. Early on he learned to be cautious about making any predictions, and he was very conscious of his ageing father’s view that the whole thing was a waste of time. Being a scientist or an inventor was not, in Giuseppe Marconi’s opinion, a ‘career’, unless, like their neighbour Righi, you had a professorship.
From time to time Guglielmo would allow his English cousins to visit the attic, where he would show them the magic he could perform with crackling sparks which made a bell ring by a mysterious force. He himself could not really explain how these tricks worked. He achieved them by trial and error, making use of every bit of electrical equipment and every published experiment he could lay his hands on. For his electricity supply he could buy batteries. It was also a simple matter to get hold of a Morse key and a Morse printer, for these were mass-produced for the telegraph industry, and there were many models on the market.
Morse code was a set of dots and dashes which represented the letters of the alphabet. The sender pressed a lever on the key, making an electrical connection which in turn activated a circuit connected to a printer which recorded either a dot or a dash. Hold the lever down for a short time, and it was a dot; longer, and it was a dash. It was as simple as that. You could use a Morse key to turn a lightbulb on and off, sending out a visual signal. Ships flashed Morse messages to each other with powerful beams, but could only do this when they were in sight of each other. This was, in a sense, ‘wireless’ communication. So too were the smoke signals used by Native Americans, or jungle drums, or the simple messages sent across the sea from one island to another by striking a resonant shell with a stick. But to receive any of these messages, you had to be able to see or hear the signals. To send a message over a long distance a relay was needed. Europe had such a system in the early nineteenth century, with ‘telegraph’ stations positioned on hills. Large wooden arms were moved to relay semaphore signals from one hill to the next. The invention in the 1840s of the electric telegraph, with Morse keys and receivers connected by cables, revolutionised long-distance communication, and the old hilltop telegraph stations fell derelict.
The great potential of the ‘Hertzian’ waves that Marconi wanted to harness lay in the fact that you did not have to be able to see or hear them to receive them, and you needed no connecting cable to send a signal. How far they could travel through the air Marconi did not know, but that was not the first problem. If you could not hear or see them, how could you detect them? Marconi knew from reading electrical magazines that some ingenious solutions had been found. A French physicist, Edouard Branly, had shown in 1890 that metal filings when scattered in a test tube would not conduct electric current. However, if they were ‘hit’ by an electric charge the filings clung together, and a current could pass through the tube.
The English Professor Oliver Lodge showed in 1893 that the ‘Branly tube’ could act as a detector of Hertzian waves. When a spark was generated the invisible electro-magnetic force would, at a distance, cause metal filings to stick together. Lodge called his version of the Branly tube a ‘coherer’, and showed how it could act as a kind of electronic ‘valve’. If the coherer were put into a circuit with wires from each end, the coherer could turn a current on and off. When the filings lay scattered in the tube no current could pass through it. However, when an invisible Hertzian wave hit the tube, the filings instantly clogged together, allowing an electric current to pass through them and the circuit to be closed. It was like a tap that could be turned on or off from a distance. From a few yards away it was possible to send an invisible, inaudible signal from a ‘transmitter’, which produced Hertzian waves, to a ‘receiver’, which reacted to them, closing a circuit which might light a bulb or ring a bell.
That was more or less the state of the art when Marconi began his experiments in earnest. What he wanted to be able to do was to activate, at a distance, a Morse printer so that each time he pressed his sending key the signals would show up as dots and dashes on a tape. Batteries powered the printer, and the current from them had to flow through the coherer, which would be ‘on’ when the filings inside stuck together, and ‘off’ when they were scattered. It was relatively easy to ring a bell once, but then the metal filings in the coherer stayed stuck together, and the bell would continue to ring even after Marconi had raised the Morse lever and was no longer sending out Hertzian waves. To break the circuit and silence the bell the glass coherer had to be shaken so the metal filings lay scattered once again, and no current could pass through them.
The solution Marconi devised to this problem illustrated his craftsman’s genius. Firstly, he experimented for hours to find the best and most sensitive metal filings to put in the coherer. He then made the glass tube smaller and smaller. To do this he used thermometers, which he remoulded using a hand-bellows, heating the glass with a naked flame. He had to create a vacuum inside these miniaturised coherers to increase their efficiency, and tiny silver plugs were used at either end as terminals. Marconi estimated that to make one little coherer took him a thousand hours.
Once he had his super-sensitive mini-coherer working, Marconi devised a little hammer mechanism which was activated each time he raised the lever on his Morse key and cut off the Hertzian waves. The sharp rap the hammer gave to the tiny coherer loosened the metal filings, cutting off the current and silencing the bell. In the same way, it would turn a Morse printer on and off. Hold the key down for a short time, and you produced a dot. Raise the lever, and the printer stopped. Hold the key down again for longer, and you got a dash. It was incredibly slow, but it worked.
It had been relatively easy to make the transmitter. All that was needed was batteries to provide the current, a coil to bump up the charge, and two brass balls fixed so that there was a small gap between them. Press the Morse key and the current flowed; the electricity jumping between the brass balls created a crackling bluish-yellow spark which generated electro-magnetic