Holley Carburetors. Mike Mavrigian. Читать онлайн. Newlib. NEWLIB.NET

Автор: Mike Mavrigian
Издательство: Ingram
Серия:
Жанр произведения: Сделай Сам
Год издания: 0
isbn: 9781613253144
Скачать книгу
The Ultra HP...

       The Ultra HP series Double Pumper carbs have no choke and are designed for racing applications for which a choke is not required. This is a tumble-polished aluminum body and billet aluminum metering blocks and baseplate anodized in red (PN 80801RD).

The Street HP...

       The Street HP carbs have a smooth, contoured venturi area for superior airflow. The boosters, the dichromate finished components directly over each venturi, are the down-leg style with a single fuel hole inside each barrel opening.

The Street HP...

       The Street HP series is essentially a 4150 race carb, using features taken from race HP and Double Pumper carbs, and then “tamed and tuned” for street and light-competition applications. The Street HP series is offered in yellow chromate, black, or tumble-polished finish. Sizes range from 600 to 950 cfm. The metering system includes a timed-spark port for a vacuum-advance distributor and it is calibrated for superior throttle response for street/strip use. The Street HP baseplate offers several vacuum ports for power brakes, positive crankcase ventilation (PCV), etc.

Although various finishes...

       Although various finishes/colors are offered in Holley’s current lineup, Hard Core Black (often referred to as Hard Core Gray) has become increasingly popular for those who wish to deviate from bright colors. This Ultra HP carb is mounted to an intake manifold that has been smoothed and hydro-dipped for a carbon-fiber appearance.

Street Avenger carbs...

       Street Avenger carbs are specially designed and calibrated for optimum street performance; they are available in sizes ranging from 570 to 870 cfm. All have vacuum secondary operation and are available with either manual or electric chokes. The aluminum construction reduces weight.

Note the dual...

       Note the dual fuel-feed fittings on the primary and secondary bowls. However, the Avenger is not a double-pumper carb, so don’t assume that a carb is a Double Pumper just because it has center-hung fuel bowls and dual feed.

Note the absence...

       Note the absence of a secondary accelerator pump on the rear bowl on this Street Avenger. Remember, just because a carb has a dual feed fuel fitting for each bowl, it’s not a Double Pumper unless it has an accelerator pump on each bowl.

Avenger carbs have...

       Avenger carbs have an accelerator pump only at the primary bowl location.

Avengers are 4150...

       Avengers are 4150-series carbs, so the secondary side has metering blocks with serviceable jets.

A quick-change...

       A quick-change vacuum housing cover allows changing the vacuum spring without the need to disassemble the entire housing unit. The cover is secured with two screws. Simply remove the two screws and then remove the cover and spring. Some carbs, such as the Avenger, have this as standard equipment.

       The quick-change feature can be retrofitted to other carbs with a secondary vacuum kit. The housing cover and spring simply pull out. An O-ring seats onto the top of the housing. If it pops loose, be sure to reinstall it into its groove. The vacuum diaphragm spring sticks onto the housing top and is easily changed to a lighter or heavier spring to tune the secondary opening rate.

For off-road...

       For off-road truck applications where severe vehicle operating angles are routinely encountered, Holley’s Truck Avenger carb has a main vent tube that connects both primary- and secondary-side main vents. This prevents excess fuel spillover from sloshing out of the vent tubes. This is a 670-cfm Truck Avenger (PN 90670). (Photo Courtesy Holley Performance Products)

      The Avenger Truck series is a unique design, intended specifically for truck and off-road applications. It has a single fuel inlet, square fuel bowls with side-hung floats, and an exclusive metering block and vent tube designed to prevent fuel spillover at extreme angles. Flood-free operation accommodates climbing angles up to 40 degrees as well as side-hill maneuvers and nose-down descents up to 30 degrees.

       Dominator

      The “big boy” of Holley carburetors is the venerable Holley Dominator series, known as the 4500 series; it is often referred to as the “elephant” carb. The Dominator was designed as a large-airflow racing carburetor and debuted in 1969 (although some sources say 1968), initially to address the needs of NASCAR competition. Shortly thereafter, it was offered to the public. Today, the 4500 is extremely popular in drag racing applications. Versions are offered in 1,050, 1,150, and 1,250 cfm, as well as a “street” version rated at 750 cfm that was introduced basically to satisfy hobbyists who hungered for the Dominator look.

      The Dominator flange is unique to the 4500 series. You must use a manifold designed for use with a Dominator or install an adapter mounting plate to accept a Dominator. A Dominator cannot bolt to an intake manifold that is not designed for its larger bolt pattern.

The Dominator is...

       The Dominator is often referred to as the “elephant” carb because of its large footprint and its large range of CFM ratings. The Dominator 4500 series ranges from 750 cfm all the way to 1,475 cfm.

      Float bowls and metering blocks are similar to those found in the 4150 series, but the 4500 features an appreciably larger main body with the unique secondary linkage located between the front and rear throttle bores, underneath the main body. Throttle bores have a hefty 2.00-inch diameter, compared to 4150/4160 diameters that generally range from 1.563 to 1.688 inches.

The Dominator series...

       The Dominator series was developed specifically for top-end horsepower and torque. The classic Dominator has an aluminum main body with contoured venturi inlets for balanced airflow, a high-flow metering system, and annular boosters. The fuel bowls allow inlet plumbing on either side. The classic Dominator is offered in two- or three-circuit configurations and choices of 1 × 4 or 2 × 4 setups.

       The new Gen 3 Dominator line represents an evolution in Dominator design with a 5/16-inch–taller main body that allows larger-radius air entries and fully machined venturi surfaces. It also includes 20 percent larger fuel bowls to eliminate starvation, 12-hole billet booster inserts, adjustable external linkage, and provisions for mounting a throttle position sensor. Annular boosters on the Dominator have a series of fuel orifices spaced around the inside diameter of each booster for superior fuel atomization. Boosters help to pull fuel from the bowls as air passes through them.

The Dominator 4500...

       The Dominator 4500 has a non-staggered, square bolt-hole pattern. Other 4-barrel