CarTech®
CarTech®, Inc.
838 Lake Street South
Forest Lake, MN 55025
Phone: 651-277-1200 or 800-551-4754
Fax: 651-277-1203
© 2017 by Fred Mattson
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without prior permission from the Publisher. All text, photographs, and artwork are the property of the Author unless otherwise noted or credited.
The information in this work is true and complete to the best of our knowledge. However, all information is presented without any guarantee on the part of the Author or Publisher, who also disclaim any liability incurred in connection with the use of the information and any implied warranties of merchantability or fitness for a particular purpose. Readers are responsible for taking suitable and appropriate safety measures when performing any of the operations or activities described in this work.
All trademarks, trade names, model names and numbers, and other product designations referred to herein are the property of their respective owners and are used solely for identification purposes. This work is a publication of CarTech, Inc., and has not been licensed, approved, sponsored, or endorsed by any other person or entity. The Publisher is not associated with any product, service, or vendor mentioned in this book, and does not endorse the products or services of any vendor mentioned in this book.
Edit by Wes Eisenschenk
Layout by Monica Seiberlich
ISBN 978-1-61325-331-1
Item No. SA393
Library of Congress Cataloging-in-Publication Data
Names: Mattson, Fred, author.
Title: Automotive upholstery and interior restoration / Fred Mattson.
Description: Forest Lake, MN : CarTech, [2017]
Identifiers: LCCN 2017010581 | ISBN 9781613253311
Subjects: LCSH: Automobiles--Upholstery. | Automobiles--Interiors. | Automobiles--Conservation and restoration.
Classification: LCC TL256 .M38 2017 | DDC 629.2--dc23
LC record available at https://lccn.loc.gov/2017010581
Written, edited, and designed in the U.S.A.
Printed in China
10 9 8 7 6 5 4 3 2 1
Title page:
Upon inspection of the new carpet set, the model reveals that some of the chalked lines need to be straightened and some additional trimming must be done before any sewing can happen. Addressing these issues now gives the carpet a better fit when it is installed.
Back Cover Photos
Top:
The locations of the armrest mounting holes are measured and transferred to the new door panel. Through-holes are cut in the new door panel with a 1/2-inch hole punch. These access holes make the attachment of the armrest hardware easier.
Middle:
The new seat cover has been steamed and inspected. The new seat cover looks just like the original when it was new. With the addition of the front accessory aprons screwed in place, the front seat is complete and ready to be installed in the car.
Bottom Left:
A piece of scrap panel board is used to size the bottom edge of the cleat. The metal is hammered over the edge of the panel board and then sized for a secure fit. It is easy to overwork the metal on small flanges like this, which causes the piece to warp.
Bottom Right:
The chrome was good on this medallion, so I opted to restore it instead of replacing it. After a thorough cleaning, the color on the medallion was restored with a fine artist brush and adding a high-gloss paint to the surface a drop at a time.
DISTRIBUTION BY:
Europe
PGUK
63 Hatton Garden
London EC1N 8LE, England
Phone: 020 7061 1980 • Fax: 020 7242 3725
Australia
Renniks Publications Ltd.
3/37-39 Green Street
Banksmeadow, NSW 2109, Australia
Phone: 2 9695 7055 • Fax: 2 9695 7355
Canada
Login Canada
300 Saulteaux Crescent
Winnipeg, MB, R3J-3T2 Canada
Phone 800 665 1148 • Fax: 800 665 0103
CONTENTS